MOT Status
ExpiredMileage
212,169 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Brake performance not tested (3.7.A.1)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Stop lamp not working (1.2.1b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Towbar component excessively corroded (6.6.1)
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS
Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Service brake: efficiency below requirements (3.7.B.7)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Parking brake cable not fully supported at rear
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Stop lamp not working (1.2.1b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
How Reliable is the Peugeot 405?
Based on 393,825 MOT tests across 81,151 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M48 BEX is a 1995 Peugeot 405 in Silver with a 1,905cc diesel engine. This vehicle has been through 7 MOT tests with a personal pass rate of 42.9%.
Across all 1995 Peugeot 405 models, the average MOT pass rate is 64.7% with a typical mileage of 134,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 405 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 25,967 recorded failures. If you're considering buying M48 BEX, it's worth having these areas checked by a mechanic before committing.
The Peugeot 405 typically stays on UK roads for around 37 years. At 31 years old, this Peugeot 405 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M48 BEX?
You can check the full history of M48 BEX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M48 BEX registered?
M48 BEX is a 1995 Peugeot 405, first registered on 24 February 1995.
Is M48 BEX safe to buy?
The MOT history for M48 BEX shows 7 tests with a 42.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M48 BEX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M48 BEX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.