2006 Mazda Bongo

Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked yellow (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/arch, marked yellow (5.3.6 (a) (i))

Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked yellow (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, marked yellow (5.3.6 (a) (i))

Both outer sills corroded and holed but not in prescribed area

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Child Seat fitted not allowing full inspection of adult belt outers ()

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

rear wheel arches corroded

sills corroded but not excessive within prescribed areas

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Anti-roll bar attachment bracket/mounting missing clamp broken and bush missing (5.3.3 (a) (ii)) DANGEROUS

rear wheel arches corroded

sills corroded but not excessive within prescribed areas

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing all tyres (5.2.3 (d) (ii))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Wheel arch corroded

Offside Front Inner Sill corroded.

Offside Outer Sill corroded.

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Wheel arch corroded

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked yellow (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

corrosion to sills but not excessive within prescribed areas

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front inner wing corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch to sill (5.3.6 (a) (i))

Nearside Rear Towbar slightly corroded within 30cm of towbar mounting lower quater (6.1.6 (i) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill back (5.3.6 (a) (i))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting lower quater (6.1.6 (i) (i))

Horn not working (7.7 (a) (ii))

Nearside Front inner wing corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch to sill (5.3.6 (a) (i))

Nearside Rear Towbar slightly corroded within 30cm of towbar mounting lower quater (6.1.6 (i) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill back (5.3.6 (a) (i))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting lower quater (6.1.6 (i) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Exhaust has a major leak of exhaust gases middle box (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded front of crossmember (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded rear of crossmember (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded rear of crossmember (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill end cap (2.4.A.3)

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill to floor (2.4.A.3)

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

all 4 tyres deteriated

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

near side front inner sill holed and corroded but not within 30cm of prescribed area

off side inner sill holed and corroded but not within 30cm of prescribed area

Fuel system component leaking (7.2.3)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

near side front inner sill holed and corroded but not within 30cm of prescribed area

off side inner sill holed and corroded but not within 30cm of prescribed area

Front Brake pad(s) wearing thin (3.5.1g)

Horn not working (1.6.2a)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

slight corrosion to offside outer sill

slight play nearside of steering rack

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Suspension joint nearside lower dust cover split/missing

Suspension joint nearside upper dust cover split/missing

Suspension joint offside upper dust cover split/missing

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Obligatory mirror insecure (8.1.1)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust system not adequately supported (7.1.1)