1994 Rover Mini

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Central Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Direction indicator incorrect colour Both (4.4.3 (a))

Headlamp aim too high and too far to the right. Both (4.1.2 (a))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Sub-frame attachment bracket/mounting insecure Subframe rear mount (5.3.3 (a) (i))

Central Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front wheel bearing has slight play (2.5.A.3c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement front (2.4.G.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement front (2.4.G.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front tyres low on edges

n/s rear tyre low on edges

rear sub frame starting to rust

service brake 44% locked

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

possible offside front wheel bearing noise developing

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

possible offside front wheel bearing noise developing

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Stop lamp not working (1.2.1b)