1995 Mercedes-benz C

Sill covers fitted

Corrosion in exhaust

Fluid leak, but not excessive Rear Differential (8.4.1 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing Slightly perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Uneven wear outer edge (5.2.3 (e))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing Slightly perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge uneven wear inner edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge Uneven wear outer edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Corrosion in exhaust

Fluid leak, but not excessive Rear Differential (8.4.1 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing Slightly perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Uneven wear outer edge (5.2.3 (e))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing Slightly perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge uneven wear inner edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge Uneven wear outer edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Sill covers fitted

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak ()

nearside and offside outer sills covered

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

nearside and offside outer sills covered

slight play in nearside front steering idler

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

nearside and offside outer sills covered

oil leak

slight play in rack ends

Centre Brake pipe slightly corroded (3.6.B.2c)

Nail in offside rear tyre

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area repaired, but not inappropriately (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

all brake ferrules slightly corroded

all shock absorber casings corroded

front wiper arm parking incorrectly

Nail in offside rear tyre

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Side repeater incorrect colour (1.4.A.2f)

Nail in offside rear tyre

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Body has slight corrosion (6.1.B.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Side repeater slightly discoloured (1.4.A.2f)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Body has slight corrosion (6.1.B.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Side repeater slightly discoloured (1.4.A.2f)

Body has slight corrosion (6.1.B.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Registration plate lamp not working (1.1.5c)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)