1995 Mazda MX-3

Battery insecure (1.9.1)

Nearside Side repeater excessively deteriorated so that it is not visible from a reasonable distance (1.4.A.2e)

Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear position lamp(s) adversely affected by the operation of another lamp stop lamps illuminated permanently when side lights are on (1.1.A.3f)

Stop lamp adversely affected by the operation of another lamp number plate lights coming on at same time (1.2.1f)

Exhaust noisy (7.1.4)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

cambelt cover missing / bolt loose in curcit

nearside indicator repeter lense missing

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Headlamp aim too high (1.8)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front registration plate with character(s) which are not the correct width (6.3.4a)

Horn control not readily accessible to the driver (1.6.1)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front coil spring corroded (2.4.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear coil spring corroded (2.4.C.1b)

exhaust noisy

Anti-lock braking system warning lamp does not illuminate (3.4.1b)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Offside Headlamp aim too high (1.8)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Exhaust noisy (7.1.4)

Front coil spring corroded (2.4.C.1b)

Items removed from driver's view prior to test

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear coil spring corroded (2.4.C.1b)

battery loose

offside rear wheel binding

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Brake pedal has insufficient reserve movement (3.3.A.5)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.5c)

rear brake recording little or no effort (3.7.B.5a)