1995 Ford Transit

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Front Bumper insecure (6.1.4 (a) (i))

Headlamp aim projected beam image is obviously incorrect Both sides (4.1.2 (c))

Nearside Front Inner Seat belt anchorage prescribed area is inadequately repaired Sill / step area - welding not continous and possible fibreglass/sealant used (7.1.1 (a) (i))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill / step area (7.1.1 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch in multiple areas (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired Wheel arch (5.3.6 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))

Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced Chassis leg (6.1.1 (a) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired Wheel arch (5.3.6 (a) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired Sill / step area - welding not continous and possible fibreglass/sealant used (7.1.1 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill / step area (7.1.1 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch - multiple areas (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Service brake lagging in operation (1.2.1 (d))

Brake servo inoperative (1.1.10 (a) (ii)) DANGEROUS

Nearside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Offside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Battery tray corroded but battery supported by bracket

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Rear Outer Corrossion to wheel arch

Nearside Seat belt slightly damaged (7.1.2 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis leg (6.1.1 (c) (i))

Offside Rear Outer Corrossion to wheel arch

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Prop shaft bearing housing fractured rubber mount (6.1.7 (f) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Macpherson strut top bush or bearing has excessive wear or free play strut top (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Prop shaft centre bearing worn.

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Both headlamps going opaque.

Prop shaft centre bearing worn.

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension spring mounting prescribed area is distorted but not considered excessive all rear (2.4.A.3)

Front Fuel system component leaking (7.2.3)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Trailer electrical socket damaged so that lead cannot be securely connected (1.9.3b)

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension spring mounting prescribed area is distorted but not considered excessive all rear (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive front and rear (2.4.A.3)

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Parking brake lever has little reserve travel (3.1.6b)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Centre Front Lower Vehicle structure has slight corrosion (6.1.A.1)

Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Centre Front Lower Vehicle structure has slight corrosion (6.1.A.1)

Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear rear brake binding (3.7.B.1)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Vehicle structure has slight corrosion (6.1.A.1)

offside mirror cover missing

welding repairs undersealed

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front Headlamp aim too high (1.8)

Offside Front coil spring corroded (2.4.C.1b)

corrosion outside structural areas

o/s/f mirror cover missing

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Shock absorber casing damaged externally so the unit does not function (2.7.2a)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

corrosion to offside front wheel arch no sharp edges at time of test

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Nearside Stop lamp not working (1.2.1b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

corrosion to rear doors no sharp edges at time of test

propshaft centre bearing worn

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)