1995 Mitsubishi Lancer

Exhaust noisy (8.1.1 (a))

Items removed from driver's view prior to test ()

Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))

Items removed from driver's view prior to test ()

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

innier outer sills getting rusty

Oil leak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint is insecure (2.5.C.1b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

o/s/f tyre crackeed side wall

Nearside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Emissions not tested (7.0)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Shock absorber insecure (2.7.2b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Lower Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Passenger's seat insecure (6.2.A.1)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake: efficiency below requirements (3.7.C.1b) DANGEROUS

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Fuel pipe/s corroded

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside rear brake disc pitted, but not excessively

Nearside Headlamp aim too high (1.8)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Headlamp aim too high (1.8)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Brake pipe slightly corroded (3.6.B.2c)

Fuel pipe/s corroded

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

offside rear brake disc pitted, but not excessively

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Registration plate lamp not working (1.1.C.1d)

exhaust blow

rear brake pipes corroded

Exhaust noisy (7.1.4)

Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake hose slightly chafed (3.6.B.4d)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust noisy (7.1.4)

Offside Rear brake disc slightly pitted (3.5.1h)

both rear trailing arm front bushes slightly perished and worn

nearside front outer drive shaft gaitor slightly twisted

Emissions not tested (7.0)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.5c)

Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake hose slightly chafed (3.6.B.4d)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust noisy (7.1.4)

Offside Rear brake disc slightly pitted (3.5.1h)

both rear trailing arm front bushes slightly perished and worn

nearside front outer drive shaft gaitor slightly twisted

Brake pedal spongy (3.3.B.1b)

Front constant velocity joint gaiter split (2.5.C.1a)

registration plate with character(s) which are not the correct width (6.3.4a)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly scored (3.5.1h)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both front tyres showing wear on inside and outside edges

Front position lamp(s) incorrect colour (1.1.A.3e)

Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS