1994 Volkswagen Polo

Central Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount (5.3.6 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock mount (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Obligatory mirror slightly damaged (3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear coil spring corroded both (2.4.C.1b)

Suspension weakened but no possibility of the body or a component fouling a road wheel all (2.4.A.1b)

Vehicle structure has slight corrosion (6.1.B.2)

oil leak gear box

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Macpherson strut has excessive movement at the upper attachment both (2.5.A.1c)

Front Suspension arm corroded and seriously weakened both (2.4.G.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate deteriorated (6.3.1d)

Service brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear coil spring corroded both (2.4.C.1b)

Suspension weakened but no possibility of the body or a component fouling a road wheel all (2.4.A.1b)

Vehicle structure has slight corrosion (6.1.B.2)

oil leak gear box

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm 175 /70/13 (4.1.E.1)

offside front tyre on limit

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake load sensing valve linkage seized (3.6.E.3)

nearside rear tyre perrishing

rear compensator valve stiff

Exhaust has a minor leak of exhaust gases (7.1.2)

Nail in nearside rear tyre

both front wheels slight bind