MOT Status
ValidMileage
257,190 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Lower Steering column universal joint has slight wear or play (2.2.2 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear cross member corroded
general corrosion under vehicle
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Lower Steering column universal joint has slight wear or play (2.2.2 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
general corrosion under vehicle
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Fuel system component leaking pump (6.1.3 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
under side undersealed
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Lower Steering column universal joint has excessive wear or play (2.2.2 (c))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top strut (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil end (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear cross member corroded
general corrosion under vehicle
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting area (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear cross member corroded
general corrosion under vehicle
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Nearside Rear Steering component mounting prescribed area is excessively corroded inner sill (2.1.2 (e) (i))
Offside Front Steering component mounting prescribed area is excessively corroded inner arch (2.1.2 (e) (i))
Offside Rear Steering component mounting prescribed area is excessively corroded chassis leg (2.1.2 (e) (i))
Offside Rear Steering component mounting prescribed area is excessively corroded inner sill (2.1.2 (e) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Nearside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Rear fog lamp does not emit a steady red light (4.5.4 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)
Offside Rear fog lamp emits a light other than red (1.3.2e)
Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Steering system has excessive free play detected at the steering wheel (steering rack fitted) steering uj (2.2.A.1b)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Rear fog lamp emits a light other than red (1.3.2e)
Front Brake pad(s) wearing thin (3.5.1g)
Lower Steering pivot point has slight play (2.2.B.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
off side front inner sill corroded
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Rear Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Lower Steering pivot point has slight play (2.2.B.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Battery insecure (1.9.1)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Fuel system component leaking (7.2.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front front brake juddering severely (3.7.A.2b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake juddering slightly (3.7.A.2b)
fuel filler neck rusting
Nearside Rear Body has a projection caused by corrosion (6.1.C.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake juddering slightly (3.7.A.2b)
fuel filler neck rusting
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside front brake juddering slightly (3.7.A.2b)
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) incomplete (1.1.4a)
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
front brake application uneven (3.7.B.2)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M609 UMO is a 2002 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 39 MOT tests with a personal pass rate of 53.8%.
Across all 2002 Mazda Bongo models, the average MOT pass rate is 70.9% with a typical mileage of 118,797 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying M609 UMO, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 24 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of M609 UMO?
You can check the full history of M609 UMO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M609 UMO registered?
M609 UMO is a 2002 Mazda Bongo, first registered on 11 June 2002.
Is M609 UMO safe to buy?
The MOT history for M609 UMO shows 39 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M609 UMO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M609 UMO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.