1995 Toyota 4-RUNNER

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Anti-roll bar insecure (2.4.G.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1) DANGEROUS

Exhaust mounting broken, but exhaust is secure

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Oil leak

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Body insecure and dangerous to other road users (6.1.B.1b)

Brake pipe excessively corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Horn control missing (1.6.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Steering pivot point has slight play (2.2.B.1g)

Brake cable has wires broken and is significantly weakened (3.5.1b)

Exhaust has a part missing (7.1.1a)

Front Brake cable has wires broken and is significantly weakened (3.5.1b)

Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Anti-roll bar linkage fractured (2.4.G.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

both rear backing plates corroded

brake pipes heavily undersealed

rear handbrake cable very rusty

undercarriage heavily undersealed

Front brake disc excessively pitted (3.5.1h)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Outer Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front brake disc excessively pitted (3.5.1h)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

both rear backing plates corroded

brake pipes very heavily undersealed

rear handbrake cable rusty

undercarrage heavily undersealed

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

nearside front inner brake disc surface very rusty

rear suspension bump stops close to rear axle but still sufficient clearance at time of test

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

nearside front inner brake disc surface very rusty

rear suspension bump stops close to rear axle but still sufficient clearance at time of test

n/s front brake disc inner surface getting quite rusty