MOT Status
ExpiredMileage
176,488 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
FUEL PIPES RUSTY
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
OFFSIDE AND NEARSIDE INNER SILLS RUSTY
Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Offside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded fuel fill pipe and EVAP lines ()
Nearside Headlamp lens slightly defective fading (4.1.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective fading (4.1.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened including attached components (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Subframe mounting prescribed area is corroded but not considered excessive FLOOR (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Subframe mounting prescribed area is corroded but not considered excessive nearside floor (5.3.6 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive offside floor (5.3.6 (a) (i))
headlamp beam images faded
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Subframe mounting prescribed area is corroded but not considered excessive nearside floor (5.3.6 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive offside floor (5.3.6 (a) (i))
headlamp beam images faded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive FLOOR (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Suspension component mounting prescribed area damaged but not considered excessive FLOOR (5.3.6 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive FLOOR (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Suspension component mounting prescribed area damaged but not considered excessive FLOOR (5.3.6 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
both inner and outer sills corroded
Hazard warning lamps inoperative (4.4.1 (e))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Rear Direction indicator not working (4.4.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
both inner and outer sills corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
both inner and outer sills corroded
Rear Vehicle structure has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Brake pad(s) insecure (3.5.1g)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Front position lamp(s) not working (1.1.A.3b)
NEARSIDE AND OFFSIDE INNER SILLS RUSTY
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
NEARSIDE AND OFFSIDE INNER SILLS RUSTY
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
SLIGHT CRACKING IN NEARSIDE FRONT TYRE SIDEWALL
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc slightly scored (3.5.1h)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Steering rack gaiter split (2.2.D.2d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
GROOVING EVIDENT IN BOTH FRNT BRAKE DISCS
NEARSIDE REAR TYRE INNER EDGE ON LEGAL LIMIT
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
OFFSIDE REAR TYRE INNER EDGE CLOSE TO LEGAL LIMIT
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Exhaust noisy (7.1.4)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mitsubishi Fto?
Based on 55,254 MOT tests across 5,410 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M683 MVV is a 2001 Mitsubishi Fto in Grey with a 1,999cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 69%.
Across all 2001 Mitsubishi Fto models, the average MOT pass rate is 63.1% with a typical mileage of 100,267 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mitsubishi Fto fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,056 recorded failures. If you're considering buying M683 MVV, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Fto typically stays on UK roads for around 32 years. At 25 years old, this Mitsubishi Fto is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of M683 MVV?
You can check the full history of M683 MVV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M683 MVV registered?
M683 MVV is a 2001 Mitsubishi Fto, first registered on 8 November 2001.
Is M683 MVV safe to buy?
The MOT history for M683 MVV shows 29 tests with a 69% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M683 MVV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M683 MVV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.