1994 Rover Mini

Front fiber glass bonnet and wings fitted with strengthening brks

Front All position lamps not working (1.1.A.3b)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake pipe fouled by moving parts (3.6.B.2a)

Nearside Front Steering locking device insecure (2.2.C.1g)

Nearside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Nearside Headlamp aim too low (1.8)

Nearside Rear Subframe mounting prescribed area is excessively corroded boot floor (2.4.A.3)

Nearside Side repeater missing (1.4.A.2b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake pipe fouled by moving parts (3.6.B.2a)

Offside Front Steering locking device insecure (2.2.C.1g)

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Rear Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Side repeater missing (1.4.A.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear All position lamps not working (1.1.A.3b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear fog lamp tell tale not working (1.3.1b)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive battery tray (2.4.A.3)

Brake servo insecurely mounted (3.6.A.2a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Brake pipe inadequately clipped (3.6.B.1)

Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Hydraulic brake cylinder insecurely mounted (3.6.A.2a)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too low (1.8)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

boot floor corroded

Nearside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Lower Ball joint has excessive play (2.2.B.1f)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Headlamp aim too low (1.8)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Headlamp aim too high (1.8)

Offside rear brake binding (3.7.B.1)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Rear fog lamp tell tale not working (1.3.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Side repeater not working (1.4.A.2c)

Nearside Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Rear Rear fog lamp not working (1.3.2b)

Rear Side repeater missing (1.4.A.2b)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Rear fog lamp tell tale not working (1.3.1b)

Stop lamp not working (1.2.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Front Exhaust has a minor leak of exhaust gases (7.1.2)