2007 Ford Ranger

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Body component corroded and likely to cause injury wings badly holed/corroded (6.2.1 (a) (i))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Front Inner Steering component mounting prescribed area is excessively corroded wing holed badly corroded (2.1.2 (e) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Steering component mounting prescribed area is excessively corroded chassis near idler arm (2.1.2 (e) (i))

Nearside Front Steering component mounting prescribed area is excessively corroded near steering box (2.1.2 (e) (i))

Nearside Obligatory mirror insecure (3.3 (b) (ii))

Nearside Rear Position lamp lens seriously defective (4.2.1 (b))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Inner Steering component mounting prescribed area is excessively corroded wing holed badly corroded (2.1.2 (e) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at shock absorber top mounting (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sills holed/corroded (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brake hose ferrule excessively corroded at load valve (1.1.12 (f) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Position lamp slightly affected by the operation of another lamp and offside rear (4.2.3 (c))

Nearside Rear Wheel bearing has slight play and offside rear (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

body and under body corrosion

brake pedal spongy

nearside washer poor spray

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively and offside (3.4 (b) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member (5.3.6 (a) (ii)) DANGEROUS

brake pedal spongy

nearside washer poor spray

Nearside Headlamp aim projected beam image is obviously incorrect and offside (4.1.2 (c))

Nearside Headlamp aim too high and offside (4.1.2 (a))

Nearside Rear Position lamp slightly affected by the operation of another lamp and offside rear (4.2.3 (c))

Nearside Rear Wheel bearing has slight play and offside rear (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

body and under body corrosion

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

various corrosion on underside of vehicle not holed or to excess at time of test

Oil leak, but not excessive (8.4.1 (a) (i))

o/s/f flexible hose mounting cable tied on but secure at time of test

various corrosion on underside of vehicle not holed or to excess at time of test

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

o/s/f flexible hose mounting cable tied on but secure at time of test

various corrosion on underside of vehicle not holed or to excess at time of test

Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (under bonnet) (5.3.6 (a) (i))

Offside Front Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Seat belt anchorage prescribed area strength or continuity significantly reduced both front inner sills (7.1.1 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner wheel arches (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively both split (3.4 (b) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Rear lamp damaged

Oil leak, but not excessive (8.4.1 (a) (i))

general underbody corrosion

reverse light not working

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front inner sills/floor and sides of plate corroded & holed (6.2.2 (d) (i))

Nearside Front Shock absorbers has an excessively worn bush lower bush (5.3.2 (c))

Offside Front Brake prescribed area is excessively corroded inner wing at abs pump securing bolt (1.1.21 (e) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt all split (6.1.7 (g) (ii))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting middle mounting floor corroded & holed (6.2.2 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm inner part (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

both headlight beam patterns poor

nearside front inner wing corroded & holed under air filter box

slight play in both rear wheels

under body corroded

Front Brake pad(s) wearing thin need replacing (1.1.13 (a) (ii))

Nearside Front inner pitman arm drag link end worn

Offside Front pitman arm inner drag link end worn

headlamp output slightly reduced

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Steering linkage ball joint has slight play drop arm (2.1.3 (b) (i))