2008 Mercedes-benz C

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS

Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp aim projected beam image is obviously incorrect Bulb not fitted correctly (4.1.2 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Side repeater not working (1.4.A.2c)

Nearside Brake pipe excessively corroded both front to rear (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in nearside rear tyre