MOT Status
ExpiredMileage
234,336 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (7.1.1 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
heavy surface corrosion to underside of vehicle
slight imbalance on rear brakes
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre innersill (7.1.1 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch/floor (5.3.6 (a) (i))
Offside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre innersill (7.1.1 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor/innersill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
heavy surface corrosion to underside of vehicle
slight imbalance or rear brakes
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill step/ 'a' post (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive innersill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill step/'a' post (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill step/'a' post (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive innersill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill step/'a'a post (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Brake load sensing valve linkage defective and function impaired (1.1.17 (a))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor (7.1.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill step/'a' post (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive innersill (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill step/'a'a post (7.1.1 (a) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive wheelarch under bonnet (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
offside rear chassis corroded, not in prescribed area
welding heavily undersealed, inspection slightly impaied
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis by subframe mounting (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis by subframe mounting (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded flitch (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis above beam axle (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded wheelarch (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded centre innersill (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded flitch (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outersill (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded centre innersill (5.2.6)
Rear Brake load sensing valve defective and function impaired (3.6.E.3)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive 'a' post (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive wheelarch under bonnet (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
offside rear chassis corroded, not in prescribed area
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
offside rear chassis corroded, not in prescribed area
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded wheelarch/flitch (2.4.A.3)
Offside Front Wheel bolt(s) loose (4.2.A.1e)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded wheelarch/flitch (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
offside rear chassis corroded, not in prescribed area
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill step/pillar (5.2.6)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill step/pillar (5.2.6)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brake cable has wires broken and is significantly weakened parking brake (3.5.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill step/pillar (5.2.6)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill step/pillar (5.2.6)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Play in steering rack inner joint(s)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
rear valance corroded, not in prescribed area
Battery insecure (1.9.1)
Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Play in steering rack inner joint(s)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
rear valance corroded, not in prescribed area
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Corrosion nearside rear wheelarch/closing panel
Corrosion rerar crossmember/valance
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Anti-roll bar linkage fractured (2.4.G.1)
Corrosion rerar crossmember/valance
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Corrosion rear valance
Brake load sensing valve linkage seized (3.6.E.3)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp aim too low (1.8)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp aim too low (1.8)
Offside Stop lamp not working (1.2.1b)
Corrosion rear valance
Front Brake pad(s) wearing thin (3.5.1g)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Front registration plate deteriorated (6.3.1d)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
parking brake cables outer casings deteriorated/split
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside rear brake binding (3.7.B.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Steering rack gaiter deteriorated (2.2.D.2d)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front brake disc excessively pitted (3.5.1h)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Slight corrosion and pitting both front brake discs inside face
How Reliable is the Peugeot 405?
Based on 393,825 MOT tests across 81,151 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M829 CLP is a 1995 Peugeot 405 in Red with a 1,905cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 51.7%.
Across all 1995 Peugeot 405 models, the average MOT pass rate is 64.7% with a typical mileage of 134,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 405 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 25,967 recorded failures. If you're considering buying M829 CLP, it's worth having these areas checked by a mechanic before committing.
The Peugeot 405 typically stays on UK roads for around 37 years. At 31 years old, this Peugeot 405 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M829 CLP?
You can check the full history of M829 CLP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M829 CLP registered?
M829 CLP is a 1995 Peugeot 405, first registered on 23 February 1995.
Is M829 CLP safe to buy?
The MOT history for M829 CLP shows 29 tests with a 51.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M829 CLP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M829 CLP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.