1995 Kawasaki ZX6

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear suspension bush has slight free play (2.4.A2a(i))

front brakes are in poor cindistion but not effecting brakes

Rear Rear suspension bush has slight free play (2.4.A2a(i))

rear number plate starting to deteriorate

Front brake has limited reserve travel.

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

front brake binding.

front brake spongy.

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front brake has limited reserve travel.

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

front brake binding.

front brake spongy.

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake hose excessively kinked (3.2.B3a)

Front Brake hose stretched by steering movement (3.2.B3b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Brake performance not tested (3.3)

Front Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp aim not tested (1.6)

Nearside Front Brake disc(s) cracked (3.2.A1g)

Nearside Front Direction indicator insecure (1.5.3b)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Brake pad(s) contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Brake pedal pivots excessively worn (3.1.3a)

Rear Brake performance not tested (3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Drive chain slightly tight (6.2.1d)

Front Front suspension assembly slightly misaligned (2.3.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has a slightly reduced damping effect (2.3.6c)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

front brakes binding slightly