2008 Ford Freda

Exhaust has a minor leak of exhaust gases Front section (6.1.2 (a))

Integral body structure is repaired but structural rigidity is not significantly reduced Underside of vehicle has been heavily covered in sealer (6.1.1 (d) (i))

All underside of vehicle has surface corrosion and parts covered in sealer

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Inner wing (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill (6.2.2 (d) (i))

Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill (6.2.2 (d) (i))

All underside of vehicle has surface corrosion

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Inner wing (6.2.2 (d) (i))

Oil leak, but not excessive Engine oil leak (8.4.1 (a) (i))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))

Windscreen washer not working (3.5 (a))

Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill (5.3.6 (a) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Outer sill (5.3.6 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis / all four inner arches (6.1.1 (c) (i))

exhaust system corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner arch - bumper bracket (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

exhaust system corroded

Integral body structure is corroded but structural rigidity is not significantly reduced offside inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside steering rack gaiter slightly deteriorated

Nearside front and center inner sill corroded

Nearside Steering rack gaiter insecure (2.2.D.2d)

Offside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill (2.4.A.3)

Offside Steering rack gaiter insecure (2.2.D.2d)

Nearside Front brake binding slightly

Nearside front and center inner sill corroded

near side front inner sill corroded

Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Brake pad(s) wearing thin (3.5.1g)

brake disc slightly scored (3.5.1h)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Steering locking device missing (2.2.C.1g)

Power steering ram(s) leaking from a failed component (2.3.3b)

Brake pad(s) wearing thin (3.5.1g)

brake disc slightly scored (3.5.1h)