1995 Ford Motor Home

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch/chassis into strut mounting (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/inner arch/inner sill (6.1.1 (c) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill front to back and inner holed (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch/Chassis (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/inner sill. Chassis outrigger holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Areas around rear leaf spring hanger (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material All brake pipes (1.1.11 (c))

Heavily undersealed

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Top of bulkhead around windscreen-within 30cm of A Pillar (6.2.2 (d) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Tow ball home made for bike carrier or such like

Brake pipe corroded, covered in grease or other material front to rear both pipes (1.1.11 (c))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b))

Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step section (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch section (5.3.6 (a) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step section (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch section (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre sill (6.1.1 (c) (i))

Nearside Rear Road wheel fixing missing Wheel nut missing (5.2.1 (a) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch corroded (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i))

Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Next to battery tray (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Central Rear Towbar with an unsafe modification to primary components (6.1.6 (g) (ii)) DANGEROUS

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Vehicle structure has slight corrosion SPRING HANGER (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust system not adequately supported (7.1.1)

Rear Registration plate lamp not working (1.1.C.1d)

Corrosion in the nearside front wheel arch but not within a prescribed area

Offside rear tyre slightly perished

There is corrosion around the nearside front strut top mounting but not considered excessive

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both rear outter tyre side wall perrished

n/s/r lower sping slightly missalined

Nearside Outer Front Body has slight corrosion (6.1.B.2)

Nearside Outer Rear Body has slight corrosion (6.1.B.2)

Offside Outer Front Body has slight corrosion (6.1.B.2)

o/s/r outter tyre wall has small cut

front & rear wheel arches corrosion coming through

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

n/s/f wheel arch corroded

n/s/r wheel arch

o/s/f headlamp slight damage

o/s/f wheel arch

o/s/r wheel arch

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

n/s/f inner wing corroded

o/s/f inner wing holed

o/s/r floor holed