1994 Yamaha FZR1000

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Rear position lamp deteriorated but function not impaired (1.1.1b)

front brake disc bobbins slightly loose

front brakes slightly binding

Front Headlamp aim too high (1.6)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Throttle operating incorrectly (6.2.1f)

Drive chain slightly loose (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Rear position lamp deteriorated but function not impaired (1.1.1b)

front brake disc bobbins slightly loose

front brakes slightly binding

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Rear suspension component slightly corroded. (2.4.A.1a)

Front Handlebar mounting clamp bolt loose (2.1.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Rear suspension component slightly corroded. (2.4.A.1a)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

dirty fuel

floatting disc worn

gear linkage worn

horn poor