2002 Ford Fiesta Courier

Front Exhaust has a major leak of exhaust gases joint (6.1.2 (a))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Headlamp insecure (4.1.1 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii))

Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps x2 (4.7.1 (b) (ii))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vallance complete (5.3.6 (a) (i))

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear chassis rail is slightly corroded

drivers door handle loose. offside rear top shocker bush worn. both front tyres scrubbing on inside edges. rear chassis rusty.

Brake linkage excessively corroded and seriously weakened compensator (3.5.1e)

Central Exhaust system not adequately supported (7.1.1)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Seat belt anchorage prescribed area is excessively corroded nearside front outer sill (5.2.6)

Seat belt anchorage prescribed area is excessively corroded offside rear outer sill (5.2.6)

Service brake: efficiency below requirements (3.7.B.7)

Subframe mounting prescribed area is excessively corroded offside rear chassis rail under wheel arch cover (2.4.A.3)

drivers door handle loose. offside rear top shocker bush worn. both front tyres scrubbing on inside edges. rear chassis rusty.

click on steering wheel

interior mirror missing / ignition key fault/ o/s door catch faulty

oil leak / rear chassis rusty /

Brake pedal spongy (3.3.B.1b)

Front Headlamp aim too far to the right both (1.8)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Brake load sensing valve inoperative (3.6.E.3)

Rear Brake pipe excessively corroded both (3.6.B.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Parking brake lever has no reserve travel (3.1.6b)

Seat belt anchorage prescribed area is excessively corroded both sills (5.2.6)

click on steering wheel

interior mirror missing / ignition key fault/ o/s door catch faulty

oil leak / rear chassis rusty /

Brake hose slightly deteriorated (3.6.B.4d)

Brake hose slightly deteriorated (3.6.B.4d)

Brake pad(s) wearing thin (3.5.1g)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

wheel trims fitted

Brake hose slightly deteriorated (3.6.B.4d)

Brake hose slightly deteriorated (3.6.B.4d)

Brake load sensing valve stiff (3.6.E.3)

Oil leak

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

wheel trims fitted

Offside Rear Torque/reaction arm has a slightly deteriorated rubber bush (2.4.G.2)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Obligatory mirror missing (8.1.1)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Torque/reaction arm has a slightly deteriorated rubber bush (2.4.G.2)

both sill backs weak.

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front front brake juddering severely (3.7.A.2b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake load sensing valve linkage stiff (3.6.E.3)

Nearside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Brake load sensing valve linkage stiff (3.6.E.3)

Nearside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Registration plate lamp not working (1.1.5c)

Front Macpherson strut is slightly stiff in the upper support bearing assembly (2.5.B.1b)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

spare tyre missing

Brakes imbalanced across an axle (3.7.B.5b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut is slightly stiff in the upper support bearing assembly (2.5.B.1b)

Rear Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

spare tyre missing