MOT Status
ExpiredMileage
139,879 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Inner front & rear sill sign of repair covered with black under sealant
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill(Yellow chalk mark) (6.1.1 (c) (i))
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (Yellow chalk mark) (7.1.1 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
rea axle and sub frame corroded advice only
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Rear Axle deformed but serviceable CORRODED (5.1.1 (a))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
engine light on
middle exhaust bracket snaped
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit inner shoulder bald but not exposing cords (4.1.E.1)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak ()
Upper Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
engine management light on
Brake pipe slightly corroded o/s front to rear at the rear (3.6.B.2c)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
both front tyres are part worn stamped
cut in o/s/r tyre not exposing cords
engine management light on
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Brake pipe slightly corroded o/s front to rear at the rear (3.6.B.2c)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
both front tyres are part worn stamped
cut in o/s/r tyre not exposing cords
engine management light on
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Front Tyre worn close to the legal limit badly worn on inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit badly worn on inner edge (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Stop lamp not working (1.2.1b)
Offside Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Front Tyre worn close to the legal limit badly worn on inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit badly worn on inner edge (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Rear wheel bearing rough when rotated (2.6.1)
EML illuminated.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Items removed from driver's view prior to test
Nail in offside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MA06 RBV is a 2006 Peugeot 107 in Yellow with a 998cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying MA06 RBV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MA06 RBV?
You can check the full history of MA06 RBV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MA06 RBV registered?
MA06 RBV is a 2006 Peugeot 107, first registered on 29 March 2006.
Is MA06 RBV safe to buy?
The MOT history for MA06 RBV shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MA06 RBV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MA06 RBV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.