2006 Toyota Aygo

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s & o/s (5.1.2 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced corrosion to all suspension components, inner/outer sills, front and rear cross members and brake pipes. Previous repairs and underseal carried out (6.1.1 (c) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s & o/s (5.1.2 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced corrosion to all suspension components, inner/outer sills, front and rear cross members and brake pipes. Previous repairs and underseal carried out (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s - rear bushes (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))

Under vehicle surface corrosion and previously welded/under sealed

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear tyre starting to perish

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear tyre starting to perish

Windscreen washer provides insufficient washer liquid (8.2.3)

BOTH FRONT BRAKE DISCS WORN

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

BOTH FRONT BRAKE DISCS WORN

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

slight brake bind on offside rear

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

slight brake bind on offside rear

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Off side rear tyre close to limit

Front brake disc,s worn

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)