MOT Status
ExpiredMileage
81,229 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear chassis corroded not holed
Offside Rear inner sill badly corroded
engine oil leak
front+rear exhaust mounts badly corroded
Brake pedal has insufficient reserve travel handbrake (1.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear chassis corroded not holed
Offside Rear inner sill badly corroded
engine oil leak
front+rear exhaust mounts badly corroded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
oil leak on engine
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill backing (7.1.1 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Brake pipe leaking on a hydraulic braking system nearside front to rear on pipe joint (1.1.11 (b) (ii)) DANGEROUS
Exhaust silencer slightly loose (8.1.1 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is excessively corroded innersill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded innersill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded innersill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded innersill (2.4.A.3)
nearside front tyre on wear markers
nearside rear tyre on wear markers
Nearside Front Headlamp aim too low (1.8)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Headlamp aim too low (1.8)
nearside front tyre on wear markers
nearside rear tyre on wear markers
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MA08 BVN is a 2008 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MA08 BVN, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MA08 BVN?
You can check the full history of MA08 BVN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MA08 BVN registered?
MA08 BVN is a 2008 Ford Ka, first registered on 31 March 2008.
Is MA08 BVN safe to buy?
The MOT history for MA08 BVN shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MA08 BVN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MA08 BVN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.