2008 Chrysler-jeep 300

Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

sill covers fitted

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

sill covers fitted

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

sill covers fitted

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Seat belt missing center (7.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Lower Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Lower Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

offside rear and nearside rear parking brake performance just met efficiency requirements

Headlamp aim too low both - rear level sensor broken (4.1.2 (a))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt rear arm (2.4.G.2)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened scored (3.5.1i)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt front arm (2.4.G.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt front arm (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint rear arm (2.4.G.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt rear arm (2.4.G.2)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened scored (3.5.1i)

Front Shock absorber has a light misting of oil both sides (2.7.3)

Nearside Front wheel bearing is rough on free play

engine management light on

oil leak

Front Brakes imbalanced across an axle 57% (3.7.B.5b)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Nearside Front Upper Suspension arm insecure ball joint has come out (2.4.G.1) DANGEROUS

engine management light on

oil leak

Oil leak

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brakes imbalanced across an axle (3.7.B.5b)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Registration plate lamp not working (1.1.C.1d)

Oil leak

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Fuel pipe leaking (7.2.3)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)