2006 BMW 730

Electronic stability system warning lamp indicates a fault (3.4.1c)

Fuel tank leaking at top of tank (7.2.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Wheel bolt(s) loose (4.2.A.1e)

Nearside Front Wheel bolt(s) missing (4.2.A.1e)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Rear Upper Suspension arm has excessive play in a ball joint rear arm (2.4.G.2)

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear arm (2.4.G.2)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Under trays fitted

Front registration plate displaying a honeycomb or similar effect background (6.3.3)

Rear registration plate displaying a honeycomb or similar effect background (6.3.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in offside front tyre

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Nail in offside front tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

slight play in n/s rear hub assembley

Front registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

cut in tread offside rear tyre

Nearside Headlamp aim too high (1.8)

Offside Ball joint has slight play (2.2.B.1f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside front tyre wearing on inner edge

Offside Ball joint has slight play (2.2.B.1f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside front tyre wearing on inner edge

All four brake discs are worn

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

full under body shields fitted

Nearside Front position lamp(s) not working (1.1.A.3b)