2012 Ford Mondeo

Exhaust has a minor leak of exhaust gases centre (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Inner Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

front to rear underbody/suspension components slightly corroded

Coil spring corroded both front & both rear (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Coil spring corroded both front & both rear (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust system insecure Front and nearside rear exhaust mountings/brackets broken (6.1.2 (a))

Nearside Rear Suspension arm pin or bush excessively worn Trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn Trailing arm bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Headlamp insecure (4.1.1 (c))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

em light out but engine malfunction on computer screen

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front headlamp European horizontal dipped beam image is set at the lower 2.75% limit (1.8.B,2)

Offside Front headlamp European horizontal dipped beam image is set at the lower 2.75% limit (1.8.B,2)

Nearside Front Headlamp insecure headlamp has had a mounting bracket manufactured and secured as a temporary repair. The headlamp is ready for renewal. (1.7.3)

Nearside Front headlamp European horizontal dipped beam image is set at the lower 2.75% limit (1.8.B,2)

Offside Front headlamp European horizontal dipped beam image is set at the lower 2.75% limit (1.8.B,2)

The tread depth on both front tyres is getting low