MOT Status
ValidMileage
275,629 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both (2.1.3 (g) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Suspension rod pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Valve stem slightly damaged both (5.2.3 (j))
Front Windscreen washer not working (3.5 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both (2.1.3 (g) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Suspension rod pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Valve stem slightly damaged both (5.2.3 (j))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Valve stem slightly damaged Both (5.2.3 (j))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Rear Valve stem slightly damaged both (5.2.3 (j))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Rear Valve stem slightly damaged both (5.2.3 (j))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Suspension rod ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Rear Suspension rod pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Suspension rod ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Rear Suspension rod pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play at limit (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front not within prescribed area
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play at limit (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front not within prescribed area
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Front Passenger seat(s) missing at time of test ()
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Passenger seat(s) missing at time of test ()
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake pad(s) wearing thin two-three thousand miles (3.5.1g)
Nearside Front Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Parking brake lever has little reserve travel (3.1.6b)
both front head lamp beam patterns slightly poor
no seat belts to reach center bench seat [clearly not intended for transport use]
Nearside Front All position lamps not working (1.1.A.3b)
Nearside Front Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Parking brake lever has little reserve travel (3.1.6b)
both front head lamp beam patterns slightly poor
no seat belts to reach center bench seat [clearly not intended for transport use]
Rear tyres 2mm
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Battery insecure (1.9.1)
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MAZ 9850 is a 2013 Mazda Bongo in Grey with a 1,999cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2013 Mazda Bongo models, the average MOT pass rate is 69.6% with a typical mileage of 126,195 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying MAZ 9850, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 13 years old, this Mazda Bongo is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of MAZ 9850?
You can check the full history of MAZ 9850 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MAZ 9850 registered?
MAZ 9850 is a 2013 Mazda Bongo, first registered on 1 December 2013.
Is MAZ 9850 safe to buy?
The MOT history for MAZ 9850 shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MAZ 9850 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MAZ 9850. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.