MOT Status
ValidMileage
71,694 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Windscreen washer not working (3.5 (a))
Indicator switch inoperative (4.4.2 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Windscreen washer not working (3.5 (a))
Front Exhaust silencer insecure (8.1.1 (b) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Spare wheel carrier insecure (6.1.5 (a))
Nearside Rear Suspension component attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS
Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
CORRODING AROUND FUEL FILLER/FLAP.
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear wheel inner rim slightly damaged.
SPARE TYRE SPLIT TO CORDS.(in under carrige)
corrosion taking place to vehicle underside to all metals.
different sizes tyres fitted to front than rear.
drivers seat back release not working.
metal power steering pipes corroding.
nearside & offside rear chassis legs corroding.
rear axle mount bushes becoming worn.
rear cross-member corroding.
steering rack damp.
stone chip in front screen.
Nearside Front Lower Suspension arm has excessive play in a pin/bush Front bush (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a pin/bush Front bush (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp insecure (1.1.C.1c)
Offside Stop lamp not working (1.2.1b)
Surface corrosion to vehicle under-body.
Surface corrosion to vehicle under-body.
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
offside front tyre inner edge scrubbed
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
front brake discs worn
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Valve stem slightly misaligned (4.1.D.1e)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MC06 HDA is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 60.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MC06 HDA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MC06 HDA?
You can check the full history of MC06 HDA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MC06 HDA registered?
MC06 HDA is a 2006 Ford Ka, first registered on 31 August 2006.
Is MC06 HDA safe to buy?
The MOT history for MC06 HDA shows 28 tests with a 60.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MC06 HDA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MC06 HDA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.