2003 Mercedes-benz Vito

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills outside prescribed area (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area repaired, but not inappropriately inner sills (2.4.A.3)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

slight corrosion around vehicle

Front Anti-roll bar linkage has excessive play in a ball joint both (2.4.G.2)

Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc both (2.5.C.1a)

Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sills (5.2.6)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sills (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sills (5.2.6)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear parking brake recording little or no effort both (3.7.B.6a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills outside prescribed area (2.4.A.3)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

slight corrosion around vehicle

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre (6.1.B.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

front subframe mounting area slightly corroded

offside front inner cv boot deterioted

Brake pipe slightly corroded (3.6.B.2c)

Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

nearside and offside sill in poor condition

offside rear tyre side wall in poor condition

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe slightly corroded (3.6.B.2c)

Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

nearside and offside sill in poor condition

offside rear tyre side wall in poor condition

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake hose slightly damaged (3.6.B.4d)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

exhauste in poor condition

nearside and offside sill in poor condition

nearside rear tyre side wall in poor condition

nearside rear tyre worn low from inner edge

offside front tyre worn low

Offside Front Fuel system component leaking (7.2.3)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake hose slightly damaged (3.6.B.4d)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

exhauste in poor condition

nearside and offside sill in poor condition

nearside rear tyre side wall in poor condition

nearside rear tyre worn low from inner edge

offside front tyre worn low

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pad(s) insecure (3.5.1g)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust rubber mounting in poor condition

Offside rear brake disc corroded

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear wheel bearing has slight play (2.6.2)

Brake load sensing valve linkage seized (3.6.E.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Registration plate lamp not working (1.1.5c)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Service brake: efficiency below requirements (3.7.B.7)