2004 Honda Civic

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jack point inner sill corroded (6.1.1 (c) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jack point inner sill corroded (6.1.1 (c) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material all both sides (1.1.11 (c))

Front Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced majority of underside (6.1.1 (c) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material all both sides (1.1.11 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases front + rear (6.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material all both sides (1.1.11 (c))

Front Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced majority of underside (6.1.1 (c) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material all both sides (1.1.11 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake hose has slight corrosion to ferrule all both sides (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material all both sides (1.1.11 (c))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule all both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material a;ll both sides (1.1.11 (c))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Headlamp lens slightly defective Front lenses faded (4.1.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Headlamp lens slightly defective Front lenses faded (4.1.1 (b) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened Both rear discs pitted (1.1.14 (a) (ii))

Headlamp lens slightly defective Both fronts faded (4.1.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin 3mm (1.1.13 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil level low

Items removed from driver's view prior to test ()

Nearside Front Service brake binding but not excessively Advise further in depth investigation as soon as possible (1.2.1 (f))

Nearside Rear Nail in tyre ()

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Nearside Front tyre on 3mm 205/55/16

front brake pads on 3mm approximately

Nearside Front tyre on 3mm 205/55/16

Offside Registration plate lamp not working (1.1.C.1d)

front brake pads on 3mm approximately

rear offside tyre perrished

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Unable to check outer sills plastic covers fitted