2006 Toyota Aygo

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases rear box (6.1.2 (a))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Central Front Stop lamp(s) with a multiple light source up to 1/2 not functioning high level brake light (4.3.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake effort inadequate at a wheel sounds like shoes have collapsed (1.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Central Front Stop lamp(s) with a multiple light source up to 1/2 not functioning high level brake light (4.3.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material Corroded. (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material Corroded. (1.1.11 (c))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material Corroded. (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake pipe corroded, covered in grease or other material Corroded. (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material Corroded. (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake pipe corroded, covered in grease or other material Corroded. (1.1.11 (c))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

front exhaust bracket broke

Front exhaust bracket corroded

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear rear brake application uneven (3.7.B.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front exhaust bracket corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on main beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)