MOT Status
ValidMileage
170,749 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Front Brake hose has slight corrosion to ferrule and rear all (1.1.12 (f) (i))
Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Front Suspension component corroded but not seriously weakened and rear (5.3.3 (b) (i))
Fuel Pipe/s corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front bumper damage covere with duck tape
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))
previous sign of repair under body
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Front Brake hose has slight corrosion to ferrule and rear all (1.1.12 (f) (i))
Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Front Suspension component corroded but not seriously weakened and rear (5.3.3 (b) (i))
Fuel Pipe/s corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front bumper damage covere with duck tape
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))
previous sign of repair under body
Coil spring corroded both sides (5.3.1 (b) (i))
Front Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Suspension component corroded but not seriously weakened and rear (5.3.3 (b) (i))
Front Track rod end ball joint has slight play both sides (2.1.3 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake drum worn, but not excessively both sides (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
sign of previous repair under body
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Headlamp not working on dipped beam both (4.1.1 (a) (ii))
Nearside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Inner Brake pad(s) less than 1.5 mm thick both sides (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
handbrake need adjustment
Front Headlamp not working on dipped beam both side (4.1.1 (a) (ii))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
handbrake need adjustment
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Headlamp not working on dipped beam both sides (4.1.1 (a) (ii))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))
Coil spring corroded all (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
under body has age related corrosion
Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt both front outer (6.1.7 (g) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))
Coil spring corroded all (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
under body has age related corrosion
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Exhaust system insecure (6.1.2 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Registration plate lamp not working (1.1.C.1d)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear tyre cracked.
E,M,L on at time of test.
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MD06 GWW is a 2006 Toyota Aygo in Black with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MD06 GWW, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MD06 GWW?
You can check the full history of MD06 GWW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MD06 GWW registered?
MD06 GWW is a 2006 Toyota Aygo, first registered on 13 July 2006.
Is MD06 GWW safe to buy?
The MOT history for MD06 GWW shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MD06 GWW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MD06 GWW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.