MOT Status
ExpiredMileage
67,939 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal (5.3.6 (a) (i))
Nearside Rear Inner inner wheel arch corroded but not in 30cm off a proscribed area
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Front Windscreen washer not working (3.5 (a))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))
Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim unable to be tested bulb failure (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Offside Headlamp aim not tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Headlamp aim not tested (4.1.2 (b))
Offside Headlamp lens seriously defective condensation within (4.1.1 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area / chassis (5.3.6 (a) (i))
Nearside Front Tyre obviously under inflated (5.2.3 (l))
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Suspension component mounting prescribed area is corroded but not considered excessive both front and both rear (5.3.6 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive both front and both rear (5.3.6 (a) (i))
Tyre slightly damaged/cracking or perishing both rear badly perished (5.2.3 (d) (ii))
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
intermittant fault on washers
n/s/f tyre worn
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MD06 UCJ is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MD06 UCJ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MD06 UCJ?
You can check the full history of MD06 UCJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MD06 UCJ registered?
MD06 UCJ is a 2006 Ford Ka, first registered on 25 July 2006.
Is MD06 UCJ safe to buy?
The MOT history for MD06 UCJ shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MD06 UCJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MD06 UCJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.