2006 Kia Sportage

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Spare tyre defective ()

Nearside Rear Outer rear bumper brackets holed

Offside Rear Outer rear bumper brackets holed

Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Nail in tyre ()

Nearside Rear Outer rear bumper brackets holed

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer rear bumper brackets holed

Items removed from driver's view prior to test ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Driver's view of the road through the swept area of the windscreen materially affected by an obstruction sun visor will not stay in the folded up position (3.1 (a) (ii))

Items removed from driver's view prior to test ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

No coolant.(Topped up for MOT)

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Items removed from driver's view prior to test ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear brake back plate missing

Offside headlamp pattern deteriorated

Radiator insecure

Rear Lower Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Top coolant hose cut.

Tow bar electrics cut off

Towball/hitch not fitted at time of test tow bar cut off ()

Vehicles internal headlight adjuster altered to recheck lights ()

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end seriously misaligned (2.1.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

No coolant.(Topped up for MOT)

Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Items removed from driver's view prior to test ()

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear brake back plate missing

Offside headlamp pattern deteriorated

Radiator insecure

Rear Lower Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Top coolant hose cut.

Tow bar electrics cut off

Towball/hitch not fitted at time of test tow bar cut off ()

Vehicles internal headlight adjuster altered to recheck lights ()

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

both front tyres worn on inner edges and close to legal limit

offside rear brake disc back plate missing

Under-trays fitted obscuring some underside components

windscreen marked

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

windscreen marked

wiper blades starting to split

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)