MOT Status
ExpiredMileage
73,390 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush perished (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill area corroded (5.3.6 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush perished (5.3.4 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill area corroded (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases Back box joint (6.1.2 (a))
Rear axle corroded
Rear shocks corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced Rear chassis (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush perished (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill area corroded (5.3.6 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush perished (5.3.4 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill area corroded (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases Back box joint (6.1.2 (a))
Rear axle corroded
Rear shocks corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced Rear chassis (6.1.1 (c) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner/outer sill (5.3.6 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner/outer sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Coil spring corroded (5.3.1 (b) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated leaking grease (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear bumper damaged
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
n/s/r tyre low and perishing in tread 155/65/14t
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Registration plate lamp does not illuminate simultaneously with the position lamps both (4.7.2 (a))
n/s/r tyre low and perishing in tread 155/65/14t
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Headlamp aim too high Both (1.8)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
all four tyre have cracking within the treads no cords or plys visible
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MD55 KFW is a 2006 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MD55 KFW, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MD55 KFW?
You can check the full history of MD55 KFW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MD55 KFW registered?
MD55 KFW is a 2006 Toyota Aygo, first registered on 30 January 2006.
Is MD55 KFW safe to buy?
The MOT history for MD55 KFW shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MD55 KFW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MD55 KFW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.