2005 Toyota Aygo

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))

Underbody general corrosion

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))

Underbody general corrosion

Both front to rear brake pipes corroded

Both front tyres are perished

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Both front to rear brake pipes corroded

Both front tyres are perished

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill hole (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive very rusty (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material o/s & n/s (1.1.11 (c))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sill to floor areas / inner arches (5.3.6 (a) (i))

both headlight projected images are blurred due to lens wear - borderline

offside rear bumper corner slightly insecure to body - not likely to come away

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear and offside rear outer sill/inner plate is corroded and holed (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sill to floor areas / inner arches (5.3.6 (a) (i))

both headlight projected images are blurred due to lens wear - borderline

offside rear bumper corner slightly insecure to body - not likely to come away

Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Items removed from driver's view prior to test ()

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 27 (3.7.B.5b)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

centre exhaust in poor condition

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)