MOT Status
ValidMileage
123,832 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear closure panel and outer sill corroded
Offside Rear closure panel and outer sill corroded
Rear axle bushes slightly worn
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by axle mounting (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Coolant leak rad ? ()
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive by axle mounting (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Exhaust has a minor leak of exhaust gases bracket corroded (6.1.2 (a))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Central Hazard warning lamps inoperative (4.4.1 (e))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Coolant leak ()
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Hazard warning lamps inoperative (4.4.1 (e))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor (6.2.2 (d) (i))
Offside Rear Body panel insecure sill to floor (6.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Coolant leak ()
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill back (2.4.A.3)
Offside Front tyre devoid of tread on inner edge
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill back (2.4.A.3)
rear tyres cracking on treads
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside rear brake binding (3.7.B.1)
Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill back (2.4.A.3)
Offside Front tyre devoid of tread on inner edge
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill back (2.4.A.3)
rear tyres cracking on treads
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Hazard warning lamps inoperative (1.4.B.1b)
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Stop lamp not working (1.2.1b)
Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MD55 XBM is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 64.3%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MD55 XBM, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MD55 XBM?
You can check the full history of MD55 XBM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MD55 XBM registered?
MD55 XBM is a 2006 Toyota Aygo, first registered on 22 February 2006.
Is MD55 XBM safe to buy?
The MOT history for MD55 XBM shows 28 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MD55 XBM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MD55 XBM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.