MOT Status
ExpiredMileage
198,198 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing area (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Seat belt anchorage prescribed area is excessively corroded centre sill (5.2.6)
Nearside Side repeater insecure (1.4.A.2b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing area (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Seat belt anchorage prescribed area is excessively corroded centre sill (5.2.6)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill and rear wishbone front mount area (2.4.A.3) DANGEROUS
Heavy corrosion and holes throughout vehicle underside.
Nearside Front sill corroded and holed outside of prescribed areas
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened corroded (3.5.1i)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front sill corroded and holed outside of prescribed areas
Offside Rear brake disc worn, pitted or scored, but not seriously weakened corroded (3.5.1i)
Rear cross member - bumper support area corroded
rear discs scored and pitted
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Side repeater incorrect colour (1.4.A.2f)
Parking brake lever has no reserve travel (3.1.6b)
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
rear discs scored and pitted
offside front tyre wearing on inner edge
slight corrosion to front & rear brake discs
Front Exhaust system not adequately supported (7.1.1)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Side repeater not working (1.4.A.2c)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Outer Rear Brake pad(s) wearing thin (3.5.1g)
Tow ball/hitch not fitted at time of test
handbrake travel
horn not very loud
Exhaust has a minor leak of exhaust gases (7.1.2)
chassis and rear cross members corroded
front and rear discs and pads worn
nearside front inner cv boot split
rear shock absorber covers corroded
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Parking brake lever has no reserve travel (3.1.6b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
chassis and rear cross members corroded
front and rear discs and pads worn
nearside front inner cv boot split
rear shock absorber covers corroded
Exhaust has part of the system slightly deteriorated (7.1.1a)
park brake only just met requirments
slight play in o/s steering rack side arm
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Front Exhaust has part of the system excessively deteriorated (7.1.1a)
Horn not working (1.6.2a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Headlamp aim too high (1.8)
Offside Stop lamp not working (1.2.1b)
Rear Brake pipe excessively corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
slight play in o/s steering rack side arm
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s mirror glass cracked
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front tyres will require attention-On limit
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MF03 UAN is a 2003 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying MF03 UAN, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MF03 UAN?
You can check the full history of MF03 UAN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MF03 UAN registered?
MF03 UAN is a 2003 Mercedes-benz Vito, first registered on 24 March 2003.
Is MF03 UAN safe to buy?
The MOT history for MF03 UAN shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MF03 UAN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MF03 UAN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.