2006 Mercedes-benz C

Front Suspension arm pin or bush worn but not resulting in excessive movement Bothsides (5.3.4 (a) (i))

Rear Anti-roll bar ball joint has slight play Bothsides (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Bothsides (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust bracket broken but exhaust still secure

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened O/s & N/s (1.1.14 (a) (ii))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Anti-roll bar has slight play in a pin/bush both (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Suspension component mounting prescribed area is corroded but not considered excessive nearside rear and offside rear (2.4.A.3)

child seat fitted

engine light on

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear rear brake binding (3.7.B.1)

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too low (1.8)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm has slight play in a ball joint camber arm ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint camber arm ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front wipers worn smearing screen

mill light on dash

Nearside Front Headlamp aim too high (1.8)

Nearside Front Lower Suspension arm has slight play in a ball joint camber arm ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Headlamp aim too high (1.8)

Offside Front Lower Suspension arm has slight play in a ball joint camber arm ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front wipers worn smearing screen

mill light on dash

engine management on dashboard

offside front tyre outer sidewall cracking

Offside Front Front position lamp(s) not working (1.1.A.3b)

engine management on dashboard

offside front tyre outer sidewall cracking

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Rear Stop lamp not working (1.2.1b)

Offside front brake application uneven (3.7.B.2)

Offside front brake juddering severely (3.7.A.2b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)