2005 Peugeot 107

Nearside Rear Brake pipe inadequately clipped or supported to front (1.1.11 (d) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides inner sills (6.2.2 (d) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake performance unable to be tested (1.2.1 (g))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule n/s and o/s (1.1.12 (f) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Inner Tyre has a lump, caused by separation or partial failure of its structure wall (5.2.3 (d) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule n/s and o/s (1.1.12 (f) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front exhaust pipe bracket brocken

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside front brake binding (3.7.B.1)

Rear Stop lamp not working both side (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Brake pipe slightly corroded rear (3.6.B.2c)

Tyre worn close to the legal limit osf (4.1.E.1)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

Items removed from driver's view prior to test

front antiroll bar links worn

Items removed from driver's view prior to test

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

front antiroll bar links worn

front tyres low tread

wiper poor performance

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Registration plate lamp not working (1.1.5c)