2005 Toyota Aygo

Nearside Headlamp aim projected beam image is obviously incorrect Bulb Fitment (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill has Corrosion Hole (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake disc in such a condition that it is seriously weakened Both Fronts Inners (metal to metal scoring) (1.1.14 (a) (ii)) DANGEROUS

Brake pad(s) less than 1.5 mm thick Both Fronts Inners (metal to metal) (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both Front Linkages (5.3.4 (a) (i))

Brake hose has slight corrosion to ferrule Both Rear Hoses and Brake Pipe Unions (1.1.12 (f) (i))

Coil spring corroded Both Rears (5.3.1 (b) (i))

Exhaust mounting defective Both Front and Rear Metal Mounts Corroded/Broken Off System (6.1.2 (a))

Handbrake Lever has Excess Travel

Nearside Front Headlamp Loose

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing Cracking (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension arm ball joint dust cover severely deteriorated Both Front Ball Joints (5.3.4 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both Rear Inner Sills/Mounting Areas (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Rear tyre outer edge slightly worn

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear tyre slightly perished

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Obligatory mirror missing (8.1.1)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear tyre slightly perished

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Parking brake lever has little reserve travel (3.1.6b)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front brake fluctuating, but not excessively (3.7.B.3)

engine management lamp on

offside rear brakes binding slightly

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front brake fluctuating, but not excessively (3.7.B.3)

engine management lamp on

offside rear brakes binding slightly

engine management light illuminated indicating a possible fault

Brakes imbalanced across an axle (3.7.B.5b)

engine management light illuminated indicating a possible fault

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight pulsation from nsf whell when spun.

Nearside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight pulsation from nsf whell when spun.

advise front brake discs lipped and pitted