2006 Toyota Aygo

Brake pipe excessively corroded front to rear both (1.1.11 (c))

Exhaust emissions likely to be affected by an exhaust leak mid to rear (8.2.2.1 (b))

Horn not working (7.7 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive rear underside of vehicle and axle (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all surface corrosion (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear axle mounts (5.3.6 (a) (i))

Rear Service brake excessively binding both (1.2.1 (f))

Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material all surface corrosion (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear axle mounts (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounts (5.3.6 (a) (i))

Horn not working (7.7 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounts (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear inner sills/chassis has surface corrosion (5.3.6 (a) (i))

Exhaust emissions likely to be affected by an exhaust leak mid and rear (8.2.2.1 (b))

Headlamp aim projected beam image is obviously incorrect both,lenses defective (4.1.2 (c))

Rear Service brake excessively binding both (1.2.1 (f))

Brake pipe corroded, covered in grease or other material front to rear and rear (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear inner sills/chassis has surface corrosion (5.3.6 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Rear Vehicle Identification Number incomplete (0.2 (b))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside front brake excessively fluctuating (3.7.B.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

nearside rear brakes slightly binding.

offside rear tyre cracking inbetween tread.