2006 Chevrolet Matiz

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) DANGEROUS

Offside Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced underbody and inner sills (6.1.1 (c) (i))

front shock absorbers surface corrosion

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Service brake binding but not excessively x2 (1.2.1 (f))

slight under body corrosion

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Service brake binding but not excessively x2 (1.2.1 (f))

slight under body corrosion

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Suspension arm corroded but not seriously weakened both front (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

cambelt

tyres and some under inflated

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

tyres and some under inflated

uneven tyre wear

Nearside Front Outer Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

uneven tyre wear

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

small cut in nearside wiper but still clears screen

Offside Headlamp aim too high (1.8)

small cut in nearside wiper but still clears screen