2006 Toyota Aygo

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp lens slightly defective Both front head lights misty (4.1.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement bush perished (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing Cracking in tread (5.2.3 (d) (ii))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement bush perished (5.3.4 (a) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Hole in outer sill (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Worn on inner and outer edges (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material Both rear brake pipes corroded (1.1.11 (c))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Coolant leak Coolant level low ()

Front Headlamp lens slightly defective Both front head lights misty (4.1.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement bush perished (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing Cracking in tread (5.2.3 (d) (ii))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement bush perished (5.3.4 (a) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Hole in outer sill (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Worn on inner and outer edges (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material Both rear brake pipes corroded (1.1.11 (c))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Upper Brake pipe excessively corroded (1.1.11 (c))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill central (6.2.2 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill central (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed, split and corroded (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed, split and corroded and inner wheel arch too. (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))