MOT Status
ExpiredMileage
132,089 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
All Under Vehicle Has Surface Corrosion
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive To Center sill (7.1.1 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive To Center sill (7.1.1 (a) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
All Under Vehicle Has Surface Corrosion
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive To Center sill (7.1.1 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive To Center sill (7.1.1 (a) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear tub corroded n/s and o/s
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by top shock mounting (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear tub corroded n/s and o/s
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm left (5.2.3 (e))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Spare wheel carrier fractured (6.1.5 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm left (5.2.3 (e))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Leaf spring fractured (2.4.B.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake performance not tested Brake performance not tested due to hydraulic system brake faults (3.7.A.1) DANGEROUS
Front Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b) DANGEROUS
Rear Braking system leaking Metal brake pipe leaking on load sensing valve (3.6.A.1) DANGEROUS
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded Rear metal brake pipes showing sings of corrosion (3.6.B.2c)
Underside of vehicle starting to show signs of corrosion in various places
Nearside Front Drag link end ball joint has excessive play (2.2.B.1f)
Offside Rear Drag link end ball joint has excessive play (2.2.B.1f)
Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
How Reliable is the Mazda BT-50?
Based on 27,778 MOT tests across 1,760 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MF58 LXE is a 2008 Mazda BT-50 in Silver with a 2,499cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2008 Mazda BT-50 models, the average MOT pass rate is 73.0% with a typical mileage of 78,723 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda BT-50 fails its MOT is brake pipe excessively corroded, accounting for 674 recorded failures. If you're considering buying MF58 LXE, it's worth having these areas checked by a mechanic before committing.
The Mazda BT-50 typically stays on UK roads for around 20 years. At 18 years old, this Mazda BT-50 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MF58 LXE?
You can check the full history of MF58 LXE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MF58 LXE registered?
MF58 LXE is a 2008 Mazda BT-50, first registered on 30 September 2008.
Is MF58 LXE safe to buy?
The MOT history for MF58 LXE shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MF58 LXE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MF58 LXE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.