2016 Lexmoto Xflm

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear reflector missing (4.8.2 (a) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Fuel cap ineffective rubber seal missing (6.1.3 (b) (i))

Headlamp aim too low (4.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake indicates a slightly grabbing brake only when wheel is turned opposite direction (1.2.1 (c))

Exhaust noisy end can (8.1.1 (a))

Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Wheel alignment slightly misaligned (2.4 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain excessively tight (6.1.7 (k) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))