2004 Mercedes-benz Vito

Nearside Brake pipe excessively corroded front to rear 2 pipes (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor (7.1.1 (a) (i))

Offside Body component corroded and likely to cause injury side door sharp edges (6.2.1 (a) (i))

Offside Front Brake prescribed area is excessively corroded abs pump mount/chassis (1.1.21 (e) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Lower inner corner holed and corroded

Offside Rear Inner sill holed and corroded

Rear valance holed and corroded

Brake pipe excessively corroded front to rear (1.1.11 (c))

Exhaust has a major leak of exhaust gases turbo to down pipe (6.1.2 (a))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear crossmember (6.2.2 (d) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross section to chassis (6.2.2 (d) (i))

Offside Body insecure sliding door outer skin corroded and insecure (6.2.2 (a) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross section sill to chassis (6.2.2 (d) (i))

Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Body insecure bumper (6.2.2 (a) (i))

Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Fuel Pipe/s corroded ()

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all rear chassis corroded (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security nearside and off side front jacking points corroded (6.2.2 (d) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security spring mount (6.2.2 (d) (i))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security spring mount (6.2.2 (d) (i))

Play in steering rack inner joint(s) ()

off side mirror casing corroded

Nearside Brake pipe slightly corroded front to rear x2 (3.6.B.2c)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

nearside front and rear chassis corroded offside front and rear chassis corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) incorrect colour lens broken/white light (1.1.A.3e)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Brake pipe slightly corroded front to rear x2 (3.6.B.2c)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

nearside front and rear chassis corroded offside front and rear chassis corroded

Centre Rear Rear cross member has some corrosion to the center and outer section

Nearside Front Brake pipe slightly corroded Brake pipes showing corrosion around clamped area nr/sd front behind sub frame assy (3.6.B.2c)

Nearside Has some corrosion to the out rigger next to door

Centre Rear Rear cross member has some corrosion to the center and outer section

Nearside Front Brake pipe slightly corroded Brake pipes showing corrosion around clamped area nr/sd front behind sub frame assy (3.6.B.2c)

Nearside Has some corrosion to the out rigger next to door

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Rear Registration plate lamp not working (1.1.5c)

Centre Rear Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear Direction indicators incorrect colour (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)