2009 Mercedes-benz Vito

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced front jack point (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front jack point (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced front jack point (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Exhaust system insecure (6.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Brake pipe corroded, covered in grease or other material n/s and o/s rear (1.1.11 (c))

Brake pipe corroded, covered in grease or other material n/s and o/s rear (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt insecure (2.1.3 (g) (ii))

Brake pipe corroded, covered in grease or other material n/s and o/s rear (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

o/s front tyre wearing on inner edge

Brake pipe corroded, covered in grease or other material n/s and o/s rear (1.1.11 (c))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt insecure (5.3.4 (b) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

o/s front tyre wearing on inner edge

Brake disc worn, but not excessively n/s and o/s front (1.1.14 (a) (i))

Brake pipe corroded, covered in grease or other material n/s and o/s rear (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake disc worn, but not excessively n/s and o/s front (1.1.14 (a) (i))

Brake pipe corroded, covered in grease or other material n/s and o/s rear (1.1.11 (c))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt insecure (2.1.3 (g) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre slightly damaged/cracking or perishing All 4 Tyre's (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front and rear exhaust mountings broken

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Nearside Rear coil spring broken (2.4.C.1a)

Offside coil spring broken (2.4.C.1a)

Front and rear exhaust mountings broken

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear exhaust mounting bracket broken

Parking brake lever has little reserve travel (3.1.6b)

rear exhaust mounting bracket broken

exhaust emissions too clean for the emission tester to read