2006 Seat Altea

Coil spring corroded all 4 coil springs (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Backbox (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front wheel bearing is slightly noisy.

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

all the coil springs are corroded.

both the rear tyres have cracks forming in the tread, but not deep enough to reach the cords.

various areas of corrosion to the underside of the vehicle.

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front front brake excessively fluctuating (3.7.B.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front wheel bearing is slightly noisy.

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

all the coil springs are corroded.

both the rear tyres have cracks forming in the tread, but not deep enough to reach the cords.

various areas of corrosion to the underside of the vehicle.

Exhaust corroded

Front Brake hose has slight corrosion to ferrules Both (3.6.B.4e)

Exhaust has a major leak of exhaust gases clamp loose on joint of front and mid sections due to corrosion. (7.1.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Exhaust corroded

Front Brake hose has slight corrosion to ferrules Both (3.6.B.4e)

Tailgate wiper blade in poor condition

Exhaust system is corroded

Nearside Rear Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Electrical wiring deteriorated and bare wires exposed Battery cables (1.9.2c)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring broken (2.4.C.1a)

Exhaust system is corroded

Front and brake discs are worn and corroded

Front wipers are worn

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside front brake grabbing severely (3.7.A.2b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside front brake juddering severely (3.7.A.2b)

Offside rear brake binding (3.7.B.1)

Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)