2002 Fiat Ducato

Heavy corrosion on all the chassis

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Lower Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottom arm mount (5.3.6 (a) (i))

Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Brake pipe likely to become detached or damaged bracket rotten (1.1.11 (d) (ii))

Offside Front Lower Brake pipe excessively corroded (1.1.11 (c))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottom arm mount (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Power steering pipe/hose excessively corroded both into rack (2.1.5 (g) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is modified but structural rigidity is not significantly reduced full underbody (6.1.1 (d) (i))

Nearside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Front Outer Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Suspension component mounting repair covered in underseal wheel arch (5.3.6 (a) (i))

Offside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Outer Suspension component mounting repair covered in underseal both inner steps (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive full main chassis (5.3.6 (a) (i))

Brake load sensing valve inoperative but ABS functioning unseized (1.1.17 (c) (i))

Integral body structure is modified but structural rigidity is not significantly reduced full underbody (6.1.1 (d) (i))

Nearside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Front Outer Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Suspension component mounting repair covered in underseal wheel arch (5.3.6 (a) (i))

Offside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Outer Suspension component mounting repair covered in underseal both inner steps (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive full main chassis (5.3.6 (a) (i))

Front Inner Suspension component mounting repair covered in underseal both wheel arches (5.3.6 (a) (i))

general under body corrosion

Brake load sensing valve stiff (1.1.17 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Driver's view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Front Inner brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Parking brake lever has little reserve travel (3.1.6b)

Steering component slightly corroded but serviceable (2.2.C.1d)

Brake load sensing valve seized (3.6.E.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

offside rear tyre perished and worn on inner shoulder

washer jets not fully hitting screen

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside front brake application uneven (3.7.B.2)

offside front tyre perished

offside rear tyre perished and worn on inner shoulder

washer jets not fully hitting screen

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

offside front inner valance corroded @ brake hose mount

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

both top rear marker lamps inop

nearside front marker lamp inop

Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear rear brake binding (3.7.B.1)

Upper Stop lamp not working (1.2.1b)

nearside and offside front side marker lamps inop

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)